Double The Spectral Resolution. Half The Hassle.
Integrating two five-band cameras, the RedEdge-MX and the new RedEdge-MX blue, this solution enables the most advanced remote sensing and vegetation research applications.
The New Compact CRP 2
A new compact version of our Calibrated Reflectance Panel (CRP) with the same functionality, now in a smaller size and easier to carry!
The CRP 2 in conjunction with our sensors enables more accurate compensation for incident light conditions. It has known reflectance values across the visible and near-infrared light spectrum.
Capture an image of the CRP 2 before and after each flight to provide an accurate representation of light conditions during the flight!
Direct Data Comparison between Satellite and Drone Imagery
Features
- Synchronized capture of all 10 bands for pixel aligned imagery
Standard 12 bit TIFF file outputs with embedded metadata for full access to raw data - Combined Downwelling Light Sensor and GPS for streamlined integration, accurate ambient light calibration. Only one DLS required
- Radiometrically calibrated spectral imagers for precise, repeatable measurements
- Global shutters on all 10 lenses for distortion-free results on every platform
- Comes standard with fixed bracket and quick-mount connector for easy integration
Benefits
- Compare imagery directly with Landsat and Sentinel satellite data
- Data is easily processed using Pix4D, Agisoft, and other MicaSense data partners
- Double the bands for double the analytical capabilities
- Monitor shallow water environments with the new coastal blue aerosol band
- Perform detailed analysis on chlorophyll efficiency with new red, green, and two new red edge bands strategically located on the red edge slope
Dual Camera System Specifications |
|
|---|---|
|
Weight |
508.8 g |
|
Dimensions |
8.7cm x 12.3cm x 7.6cm (3.4in x 4.8in x 3.0in) |
|
External Power |
4.2 V DC - 15.8 V DC |
|
Spectral Bands |
Coastal blue 444(28)*, blue 475(32), green 531(14)*, green 560(27), red 650(16)*, red 668(14), red edge 705(10)*, red edge 717(12), red edge 740(18)*, NIR 842(57) |
|
RGB Color Output |
3.6 MP (global shutter, aligned with all bands) |
|
Ground Sample Distance (GSD) |
8 cm per pixel (per band) at 120 m (~400 ft) AGL |
|
Capture Rate |
1 capture per second (all bands), 12-bit RAW |
|
Interfaces |
Serial, 10/100/1000 ethernet, removable Wi-Fi, external trigger, GPS, SDHC |
|
Field of View |
47.2° HFOV |
|
Triggering Options |
Timer mode, overlap mode, external trigger mode (PWM, GPIO, serial, and Ethernet options), manual capture mode |
Works With What You Have
Fly
Flying with two cameras is as easy as flying with one. This solution is compatible with a wide range of aircraft, from large fixed wings to small multirotors, and comes standard with an integration kit for DJI drones.
Process
Because the two cameras are both versions of RedEdge-MX, flight planning and data processing can be done with industry-standard tools like Pix4D and Agisoft.
Analyze
Double the bands mean double the analytical capabilities. This solution captures synchronized, pixel-aligned imagery which allows the bands from both cameras to be used interchangeably for the creation of more indices.
Dual Camera Full Kit
Integrating two five-band cameras, the RedEdge-MX and the new RedEdge-MX Blue, the Dual Camera Imaging system enables the most advanced remote sensing and vegetation research applications.
Complete Dual Camera Kit (For DJI Drones) includes:
- RedEdge-MX and RedEdge-MX blue Sensors
- Mounting Plate with Quick Connector
- DLS 2 and the new CRP 2
- Two 128GB SD Cards
- Hard-Sided Carrying Case
- Wire Harnesses
- Mounting screws
- Lens cover for both sensors
- Compass
Dual Camera - RedEdge-MX Updgrade Kit
Get double the spectral resolution with your current RedEdge-MX and the new RedEdge-MX Blue Kit. A synchronized 10-band solution for advanced remote sensing and agricultural research.
Kit contents:
- RedEdge-MX Blue sensor
- Lens cover
- Cables
- Mounting screws
- Mounting Plate with Quick Connector
- Hard-Sided Carrying Case
*Dual Camera kits are compatible with DJI Inspire 2, Matrice 300, Matrice 200 series, Matrice 100/600 series. (DJI Zenmuse 30 gimbal adapter required)
*Integration with DJI M210 RTK drone has not been validated, therefore we cannot ensure compatibility.
Contact To Purchase
Have questions? Our drone experts are here to help
